For Nintendo Switch Pro Controller Super Smash Bros Ultimate Edition Gamepad

Description

For Nintendo Switch Pro Controller Super Smash Bros Ultimate Edition Gamepad Black
Features:
1.Double motor and Bluetooth connection
2.Complete function: with screen capture function and vibration function
3.Packing weight: 320g
4.Size: 16.5x16x6.5cm
5.The use of distance: Barrier-free operation is about 8-10 meters
Switch Bluetooth Handle Operating Instructions:
1.the host's settings
(1)To
connect the Bluetooth controller, the host's Controller Connection
(Bluetooth) option is On, or the Flight Mode is turned off;
(2)Select
Controllers->Change Grip/Order on the main page to let the host
search for Bluetooth device status. (This operation is not required for
back connection)
(3)Note:
If the host is difficult to pair with the handle, it may be that the
host has too many Bluetooth devices connected, you need to manually
clear the Bluetooth information (System Setting->Controllers and
Sensors->DisConnect Controllers);
2.the handle pairing host
When
the handle is off, press and hold the small button next to the TYPE USB
for 3 seconds to enter the code status. The 4 LEDs are in the state of
fast running light. The channel indicator corresponding to the
successful connection is always on. Automatically sleeps if there is no
synchronization within 1 minute.
If the Bluetooth connection is successful, the corresponding channel indicator LED is always on (Switch host assignment)
3.the handle back to the host
When
the handle is off, press any key to wake up the handle. After being
woken up, it will automatically connect to the host that is paired with
it. If the connection is unsuccessful in 6 seconds, it will
automatically sleep.
After
the handle is successfully connected, the handle does not operate, it
will enter the sleep state according to the host system sleep setting,
the host screen is closed, and the handle automatically sleeps.
4.low voltage alarm
If
the voltage of the lithium battery is lower than 3.55V±0.1V, the
current channel light flashes quickly and the voltage is low;
If the lithium battery voltage is lower than 3.45V ± 0.1V, it will automatically sleep;
5.the handle test
Key Test: System Setting->Controllers and Sensors->Test Input Devices
3D test: System Setting->Controllers and Sensors->Calibrate Control Sticks
6.RESET test
Press the small button next to TYPE USB to close the handle;
Pack Contents:
1 x Switch Controller
1 x 1.2M Charging Cable
1 x User Manual